#Iei 212ilw keypad manual manual#

Connect the green wire (normally open) to the normally closed connection on the door position switch. Connect the blue wire (common) to the common connection on the door position switch.

#Iei 212ilw keypad manual manual#

Connect the black wire (V-) to the negative on the Maglock, and then connect them to the negative on the power supply.Ģ12iLW/242iLW Standalone Keypad Installation/Programming Manual Figure 6 Wiring the Keypad to an Electric Strike (Fail-Secure) 5.4 Shunting a Normally Closed Zone Use the following steps to use the keypad to shunt a normally closed zone: 1. Connect the gray wire (normally closed) to the positive on the Maglock. Connect the red wire (V+) to the blue wire (common), and then connect them to the positive on the power supply. Wiring 5.Ģ12iLW/242iLW Standalone Keypad Installation/Programming Manual 5.2 Wiring the Keypad to a Maglock (Fail-Safe) Use the following steps to connect the keypad to a Maglock (FailSafe): 1. Mounting height can vary depending on requirements.Ģ12iLW/242iLW Standalone Keypad Installation/Programming Manual 5. To properly size the mounting and wire access hole, use the installation template on the last page in this manual and on the unit’s container. In addition, it can be flush mounted directly to the wall surface by cutting a hole in the wall. Mounting The keypad is designed to be flush mounted using a standard singlegang electrical box. 1.Ģ12iLW/242iLW Standalone Keypad Installation/Programming Manual 4. The lock must be a fail-secure device, meaning the lock remains locked when power is removed.Ģ12iLW/242iLW Standalone Keypad Installation/Programming Manual Figure 1 Mounting a Sentrol 3012 Tamper Switch Figure 2 Mounting a Sentrol 3025T Tamper Switch 6 Document # 6050700, Rev. The tamper switch must activate if the keypad is removed from the box and must disconnect power from the lock. Keypad Tampering To prevent tampering, a tamper switch can be installed in the single gang box used for mounting the keypad. It can perform access control functions and also its four relay outputs can be assigned independently for timed operation or to latch.Ģ12iLW/242iLW Standalone Keypad Installation/Programming Manual 2.Ģ12iLW/242iLW Standalone Keypad Installation/Programming Manual 3. It has an accessory relay board that provides an additional three relays. Features and Product Description 1.Ģ12iLW/242iLW Standalone Keypad Installation/Programming Manual 1.2 Product Description The 242iLW keypad features the most flexibility and options available in a self-contained unit. 212iLW/242iLW Standalone Keypad Installation / Programming Manual This equipment is designed to be installed and serviced by security and lock industry professionals.ġ2iLW/242iLW Standalone Keypad Installation/Programming Manual 1.